STARTING/STOPPING THE DRYING FAN IN DRYING MODE
1. To turn on the display, press the RED ON BUTTON on the control panel for 1 second.
2.
The above menu will appear in the display.
3.
The drying fan is pre-set by default to drying mode.
4.
To start the drying fan, press and hold the GREEN BUTTON for 2 seconds (the fan will
start).
5. To switch off the drying fan, press and hold the RED BUTTON for 3 seconds.
The following options are available:
- Log out
- Pause drying fan for 30 minutes
- Switch off
CHANGING THE DEFAULT SETTING TO HEAT/EVENT
1. To log in, press and hold the tick button
for 1 second, the window below will
appear.
2.
Use the arrows to enter your password,
and press the GREEN button to confirm.
3. There are two levels of authorisation:
Administrator and Service.
(If no change is made to the display within
60 seconds you will be logged out automat
-
ically.)
4. To access the various menu options, press
the RED button for 1 second and the
window below will appear.
5. Use the arrows to select the default mode,
then confirm by pressing the GREEN
button.
EN
