DRAFT
11. Wireless DagHterBoarD
12. SELF-tESt/ StANDARD WIRING/ CENtRAL BAttERY SYStEM
The Surface Mount Ledfire III inverter supports an optional wireless daughterboard. The driver must be
disconnected from mains and battery must be removed, before installing or changing any expansion module.
More information and a list of other accessories can be found in the
Wireless design and installation guide.
The assembly for the Wireless daughterboard onto the inverter is shown below:
The inverter can be used in an automatic self-test mode which reduces the need for a test switch timer.
The self-test ability automatically disables if the unit is wired to DALI or the wireless daughterboard is attached.
Additionally the third generation platform can be wired to a central battery system. With this wiring the system
cannot report the light status (see
Self-test support
document for more information).
Figure 7: Daughterboard assembly diagram
Figure 8: Inverter standard wiring diagram
7
2
1
Wireless daughterboard (6118)(optional)
Surface Mount Ledfire III inverter (1204, 1207)
1
2
Installer wired
Prewired
