SURFACE MOUNT LEDFIRE III EMERGENCY INSTALLATION INSTRUCTIONS
DRAFT
23. sPacing taBle
22. aUstralian emergency classification
Below is the spacing table extract from AS/NZS 2293 which details spacing between emergency fittings at
different mounting heights.
Classification of the Surface Mount Ledfire III output when duration is selected.
HOURS
SURFACE MOUNT LEDFIRE III
1
2
3
4
8
D63
D63
D32
D25
D8
LUMINAIRE
CLASSIFICATION
MOUNTING HEIGHT (M)
2.1
2.4
2.7
3
3.3
3.6
4
4.5
5
6
7
8
9
10
15
20
D8
D25
D32
D63
12
24. constrUction sites
IMPORTANT NOTE:
Continuously switching the power supply to the fitting on and off during or after
the installation process due to other processes being conducted on the building site could cause the fitting to
discharge and charge its battery many times during a short period which can impact negatively on the battery
life. It is not recommended that you connect the Ektor emergency products to the power supply if such
conditions are prevalent. If you choose to expose the Ektor emergency products to such harsh operating
conditions, Evolt may not honour any warranty on the life of the batteries or the product enclosure. This Ektor
emergency product is designed to undergo regular discharge tests but it is recommended that the intervals
between consecutive tests are not less than two weeks. Frequent testing of the exit product will reduce the
service life of the battery. In order to prevent damage to the battery, leave the unswitched active circuit turned
off at the circuit breaker until such time as emergency lighting is required
9.4
14.2
15.4
19.4
9.7
14.7
16.1
20.3
9.9
15.3
16.7
21.1
10.1
15.7
17.2
21.8
10.2
16.1
17.6
22.4
10.3
16.5
18.0
23.0
10.4
16.9
18.5
23.7
10.3
17.3
19.1
24.5
10.2
17.7
19.5
25.2
9.5
18.1
20.2
26.4
8.3
18.3
20.6
27.4
6.1
18.2
20.7
28.1
17.9
20.6
28.6
17.3
20.3
28.9
7.7
14.6
28.0 22.5
