Ekra E1 System Manual Download Page 52

Page: 52 / 184

Chapter 5

Operation

5-11

E1 Semi-automatic screen printer

System Manual

EKRA / Doku Eisermann 05_BEDIEN_PDF.FM
30.8.02

Loading a file

Requirements:
The machine must be ready for operation and in its basic position.
The main menu must be displayed.

Press the

key.

⇒

The file menu appears.

Press either of these two keys

until the LOAD FILE func-

tion is selected.

Confirm selection of the function by pressing ENTER

⇒

The list of file names appears.

Press either of these two keys

until the required file is

selected.

Confirm selection of the file by pressing ENTER

⇒

The file is loaded. The main menu appears and the program name is
displayed.

Deleting a file

Requirements:
The machine must be ready for operation and in its basic position.
The main menu must be displayed.

Press the

key.

⇒

The file menu appears.

Press either of these two keys

until the DELETE FILE

function is selected.

Confirm selection of the function by pressing ENTER

⇒

The list of file names appears.

Summary of Contents for E1

























































































































































































Search results

Summary of Contents for E1

Reviews:

Brands by name

Popular brands

Ekra E1, System Manual

Search results

Summary of Contents for E1

Reviews:

Brands by name

Popular brands