manualshive.com logo in svg

Ekra E1, System Manual

Share
Download
Ekra E1 System Manual Download Page 148

Chapter 9

Maintenance

9-4

E1 Semi-automatic screen printer

System Manual

EKRA / Doku Eisermann 09_WARTUNG_PDF.FM
30.8.02

PC positioning system MOPS

Prevent the computer for the MOPS from overheating by always providing 
for sufficient circulation of air. 

 Fig. 31.   Machine computer at the rear of the machine

Carry out this work once a month.

†

Open the rear of the machine.

†

Use a vacuum cleaner to clean the fan at the rear of the PC.

Bearings and guideways

Note:

The E1 screen printer contains guideways and bearings which are 
lubricated for life. Even if you find a lubrication nipple on a guideway 
or bearing, this does not mean that you are expected to lubricate it.  
They are included because of the manufacturer’s production process.

Carry out this work once every six months.

†

Clean the guideways with a dry, clean cloth.

Note:

If you intend not to use the E1 printer for a relatively long time, protect 
the guideways from rust by applying grease (anti-friction bearing 
grease conforming to DIN 51825, consistency class NLGI 2 or NLGI 3).

PC MOPS

Summary of Contents for E1

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands