manualshive.com logo in svg

Ekra E1, System Manual

Share
Download
Ekra E1 System Manual Download Page 22

Chapter 2

Safety / Hazards

2-1

E1 Semi-automatic screen printer

System Manual

EKRA / Doku Eisermann 02_SICHERHEIT_PDF.FM
30.8.02

2  Safety / Hazards

Safety precautions

Note:

EKRA recommends that you check all safety devices before using the 
E1 semi-automatic printer. 

Caution:

Always switch off the power supply at the main switch of the E1 
printer before starting repair or maintenance work on the machine.
The printer must not be operated if the safety devices are not func-
tioning correctly.
Do not wear any loose-fitting clothing when working with the E1 
printer.
Before commissioning the E1 printer, check whether there are any 
tools or damaged or loose parts which could prevent mechanical 
movement of the machine and thus cause damage.
Always wear protective gloves when handling solder paste.

Danger:

Never reach into the printer during the printing process.
In an emergency, press the emergency-stop switch immediately to 
stop the E1 printer.

Summary of Contents for E1

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands