Kapitel 5
Operation
5-7
©
EuroDok
05_Bedienen.fm
Druck 23.10.08
E1-II semiautomatic screen printer
System Manual
fon
+4
9 (0
) 625
2 -
6
9
5
0
1
fa
x
+4
9 (0
) 625
2 -
6
9
5
0
3
m
ai
l@
eu
ro
do
k.de
Eu
ro
Do
k G
m
b
H
D
a
rm
st
ädt
e
r St
raße
67
D-64
646
Heppe
nh
e
im
WARNING!
Do not lower the printing table until the printing cycle has been completed.
5.2.7
Squeegee up / down
This function raises or lowers the squeegee.
For example, you can raise the squeegee in order to remove the stencil
or to change the squeegee blades.
If both squeegees are raised (status field is grey), the front or rear squee-
gee is lowered depending on the position of the squeegee head. If the
squeegees are in the printing position (status field is green), both squee-
gees are raised.
If the machine has gone back to its basic position and the squeegees
have been raised, you can change the initial position of the squeegees
(front / back) by activating the SQUEEGEE button.
5.2.8
Squeegee stop in front
Use this field to set whether or not the squeegee stops in front.
5.2.9
Vacuum / clamping
Specify here whether the printing nest vacuum or clamping should be
switched on.
5.2.10 Permanent vacuum / permanent clamping
Specify here whether the printing nest vacuum or thr clamping should be
switched on or off permanently.
5.2.11 Login
This function calls up the password level window.
The customer can determine the access authorization and hierarchy. The
passwords are assigned by the EKRA service staff. Put in the desired
password to change to the determined level.
5.2.12 Logout
Use this function to log out.
