EKOM DK50 Plus Mobile, Installation, Operation And Maintenance Manual

Page: 22 / 104

DK50
DK50 PLUS
NP-DK50_5 - 20 - 10/2009
3. ALERT NOTICES AND SYMBOLS
In the Installation, Operation and Maintenance Manual and on the appliance and its packaging, the following
labels or symbols are used for important information:
Information, instructions and cautions for the prevention of damage to health or
materials
Caution! Dangerous electric voltage
Information regarding correct use of the appliance and other warnings
CE mark of compliance
Caution! Hot surface
Compressor is remote-controlled and may start without warning
Earth (ground) connection
Terminal for ground connection
Fuse
Alternating current
Handling mark on package – Fragile, handle with care
Handling mark on package – This way up (vertical position of cargo)
Handling mark on package – Protect against moisture
Handling mark on package – Temperature during storage and transport
Handling mark on package – Limited stacking
Mark on package – Recyclable material
4. STORAGE AND TRANSPORT
The compressor is shipped in cardboard that protects the appliance from damage during transport.
Caution! For transport, always use the original packaging and secure the compressor in
the upright position.
Protect the compressor from humidity and extreme temperatures during transport and storage. A
compressor in its original packaging can be stored in a warm, dry and dust-free area. Do not
store near any chemical substances.
Keep packaging material if possible. If not, please dispose of the packaging material in an
environmentally friendly way and recycle if possible.
Caution! Before moving or transporting the compressor, release all the air pressure from
the tank and hoses and drain the condensed water.