EKOM DK50 2V/M MOBILE, User Manual

Page: 28 / 240

INSTALLATION
NP-DK50 2V-A-4_10-2022-AD 28 10/2022
11.2. Connecting the cabinet pressure gauge to the compressor

Remove the plug (1) from the threads
(2) on the pneumatic block of the
compressor.

Connect the cabinet pressure gauge
hose to the threaded fitting.
Fig. 7: Connecting the cabinet pressure gauge to the compressor
11.3. Connecting the condensate vessel

Connect the condensate drain hose to the condensate bottle on compressors in cabinet.
(Fig. 8)

Put the plug in free inlet of the condensate collection vessel.

Route the hose through the opening in the rear wall of the cabinet for compressors with
dryers. Connect the condensate collection tank using the hose to the condensate outlet on
the dryer.
Injury hazard.
Do not connect the condensate drain directly to a waste drain! Passers-by may
be injured!
Fig. 8:Connection of condensate collection vessel