EKOM DK50-10 Series, User Manual

Page: 19 / 120

INSTALLATION
10/2019 19 NP-DK50-10-A-4_10-2019-MD
INSTALLATION
Risk of incorrect installation.
Only a qualified professional can install the compressor and place it into
operation for the first time. His obligation is to train the operating personnel on
the use and maintenance of the device. He shall confirm installation and training
of operators by an entry into the installation record (see Annex).
9. INSTALLATION CONDITIONS

The compressor may only be installed and operated in dry, well-ventilated and dust-free rooms
with conditions stated in Technical data.
Risk of damage to the device.
Do not operate the device in outdoor environment or in humid or wet rooms.
Explosion risk.
Do not install the device in any rooms, in which explosive gases, dusts or
flammable liquids may be present.

The compressor must be installed in such a way, that it is accessible at all times for operation and
maintenance and label on the device is accessible.

The compressor must stand on a flat, sufficiently stable base (be aware of the compressor weight,
see Technical data).
10. COMPRESSOR ASSEMBLY
10.1. Manipulation and fixation removal

Unpack the compressor from the packaging.

Put the compressor at the place of operation (Fig. 3).
Use the compressor base for gripping, when manipulating with the compressor.
Do not use any other compressor parts (pump, cooler, etc.) for gripping the
compressor.
Fig. 4: Manipulation with the compressor

Remove transport fixing elements from the pumps (Fig. 5).