EKOM DK50-10 Series, User Manual

Page: 6 / 120

GENERAL INFORMATION
NP-DK50-10-A-4_10-2019-MD 6 10/2019
GENERAL INFORMATION
Read the User manual carefully and keep it before use of the product. The User manual provides
information on correct use
– installation, operation and maintenance of the product.
The User manual corresponds with the design of the product and condition according to the
applicable safety and technical standards at the time of printing. The manufacturer reserves all rights
concerning the protection for the stated connections, procedures and names.
Slovak version is original of the User manual. The User manual has been translated in accordance
with the best available knowledge. The Slovak version is to be used in the event of any uncertainties.
This user manual is the original instructions. Translation is performed in accordance with the best
available knowledge
1. CONFORMITY WITH THE REQUIREMENTS OF THE EUROPEAN UNION
This product conforms to the requirements of the European Union 2006/42/EC, 2014/29/EU,
2014/35/EU, 2014/30/EU, 2011/65/EU and is safe if used in compliance with the intended use and
if all safety instructions are followed.
User manual is in compliance with requirements of Directive 2006/42/EC.
2. SYMBOLS
The following symbols and marks are used in the User manual, on the device and its packaging:
General warning
Warning
– risk of electric shock
Warning - compressor is controlled automatically
Warning
– hot surface
General caution
Read the operating instructions
Refer to instruction manual
CE
– marking
Serial number
Protecting earthing
Fuse