USER INSTRUCTIONS
IMPORTANT NOTES
The installation of this fire MUST only be carried out by a competent
[1]
person in accordance with
the Gas Safety (Installation and Use) Regulations 1998, the relevant British Standards, Codes of
Practice, the Building Regulations and the manufacturers’ instructions.
Failure to comply with the above recommendations could lead to prosecution and invalidate the
appliance warranty.
Please ensure you are handed all of the manufacturers documents on completion of the installa-
tion. This will include these instructions.
Always keep a note of the installer’s name and address, the original purchase receipt and the date
of installation for future reference.
The appliance should be serviced regularly to ensure continued safe operation. See the servicing
section for further details. Frequency of service will depend on use, but MUST be carried out at
least once annually.
Parts of this appliance become naturally hot during use. It is recommended that a suitable fire
guard conforming to BS 8423 : 2002 is used, especially where young children, the elderly, or
infirm are concerned.
Combustible items, such as flooring and furniture, and soft wall coverings (such as flock, blown
vinyl or embossed paper) may discolour if fitted too close to the fire. See relevant section for fur-
ther details on clearances to combustibles. No combustible material or flooring should protrude
onto the hearth.
DO NOT burn any foreign material on this fire, the coals must be of the correct type and laid out
in accordance with the relevant section of these instructions. Failure to do so could create a haz-
ard or lead to sooting.
This appliance is fitted with a flue blockage safety device which will shut down the fire if abnor-
mal flue conditions occur. It is NOT a substitute for an independently mounted Carbon Monoxide
detector.
The fire is only suitable for use with the gas type for which it is supplied.
1
Section
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
Contents
Important Notes
Firefront
Clearances to Combustibles
Ventilation
Operating Instructions
Spillage Monitoring System
Cleaning
List of Spares
Page No.
1
2
2
2
2
3
3
3
1.0
©
2009 Focal Point Fires plc.
[1] GB - Gas Safe
TM
registered operatives (Northern Ireland only- CORGI registered operatives) are the only class of person considered as competent by the HSE under the Gas Safety (Installation and Use)
Regulations 1998.
