EKO PV Blocks MP-1000S, Instruction Manual

Page: 62 / 64

PV Blocks system Page 62
4. SPECIFICATIONS
PV Base pack (items 1-3)
1. PV Base communication module
2.
Power supply module
3.
PV Link computer module
IV / MPP pack (IV/MPP Load module)
Supply Voltage 24 VDC
Communication interface RS 485 serial communication
Operating temperature range -25ºC – 70ºC
Maximum number of PV blocks 32
Maximum number of IV/MPP blocks 8
Supply Voltage 24 VDC
Power 5 A /120 W
Input voltage range 100 VAC – 240 VAC / 50-60 Hz
Operating temperature range -25ºC – 70ºC
Supply Voltage 24 VDC
Operating temperature range -25ºC – 70ºC
Operating system Linux / web interface
Memory 4 GB
Data storage 32 GB SSD
Communication WAN / Local (3 ethernet ports)
Operating modes MPPT(P&O), Voltage Biasing, Open Voltage, Short cir-
cuit
Supply Voltage 24 VDC
Communication interface RS 485 serial communication
Operating temperature range -25ºC – 40ºC
Max Load IV measurement 600 W
Max Load MPP load 600 W
Cooling Forced ventilation
Temperature protection Delta T=60ºC ()
ADC Simultaneous measurement of current voltage, 24 bits
Voltage range / Resolution 1 – 200V / 1mV (No true zero)
Voltage Accuracy +/- 10mV
Current range / Resolution 0 – 20A / 1mA
Current accuracy +/- 10mA
IV points 100
IV sweep time 200ms – 30 seconds
IV sweep Isc – Voc or Voc - Isc
Operating modes MPPT(P&O), Volatge Biasing, Open Voltage, Short cir-
cuit