EKO PV Blocks MP-1000S, Instruction Manual

Page: 23 / 64

PV Blocks system Page 23
2.2. WORKFLOW
The PVBlocks solution is a modular system dedicated to the long term measurement of PV Mod-
ules and all its relevant parameters.
There are several PVBlocks available:
IV-MPP
The IV-MPP Block is an autonomous measurement and control unit that directly inter-
faces to an outdoor load. This load is connected close to the module to be measured.
The Block can measure IV Curves and perform MPP tracking while it continuously
measures the voltage and current (power) of the attached module.
IV-TEMP
The IV-TEMP can be used to connect and measure 4 Pt100 elements in a 3-wire config-
uration.