4
5.1
Check the voltage of the battery
•
5.2
Check that battery cables are securely connected and grease the electrodes if
necessary
•
5.3
Check whether the battery cover is damaged
•
5.4
Check the main cable for damage
•
5.5
Check the start up protection program during charging
•
Monolithic Construction
6.1
Check all labels for clarity and completeness
•
6.2
Check the frame for damage
•
6.3
Check the fixing condition of lifting door frame
•
6.4
Run a test run
•
3. Lubrication point.
Lubricate marked points according to maintenance list. Required grease specification: DIN 51825
standard grease
Pic1
：
transmission chain
Summary of Contents for EK18RF
