18
1. Roll forward button 2. Roll back button 3. The left button
4. Right move button 5. Horn button 6. Safety switch button
Insert the key into the key switch, turn to the right, turn the emergency stop switch in accordance with the
direction indicated by the arrow above the button, and open the control circuit. Slowly push down the foot
switch. Turn the steering wheel in the desired direction (forward or backward). Hold the handle lever
(safety switch must be pressed) to B direction, forklift forward
. Hold the handle lever (safety switch must
be pressed) in the F direction, the forklift back. Observe the road
condition and adjust the speed through
the handle lever. When the forklift stops running, pull the handle lever slowly to the middle O position,
and leave the pedal switch with the right foot to make the forklift stop completely. Place the fork in the
lowest position and press the safety switch to remove the key.
Summary of Contents for EK18RF
