15
3.5 Safe Operation Rules
3.5.1 Requirements for drivers
: The forklift must be operated by a trained and
certified operator.
3.5.2 Drivers’ rights, obligations and responsibilities:
They are familiar of the
operations of this forklift, the operator must be clear of his rights and
obligations; and is familiar with the contents of the relevant operating
instructions. Safety gear should always be recommended.
3.5.3 Prohibit unauthorized personnel to operate:
the driver is responsible
for the vehicle at work. They must prevent unauthorized persons from driving or
operating this truck. It is forbidden to use the vehicle to transport or lift
personnel.
3.5.4 Malfunctions and defects:
If there is any malfunction or defect for the
forklift, they must immediately inform management. If the forklift cannot be
safely operated (e.g.: wheel wear or brake failure), then all use of this forklift
must be fully inspected for repairs before operation.
3.5.5 Safe operation and environmental protection:
inspection and
maintenance must be performed in accordance with the time intervals on the
maintenance list.
Forklift parts cannot be changed without being a certified technician,
especially safety devices. The operating speed of the forklift is not allowed to
change.
To ensure the safety and reliability of the operation of this forklift, spare
parts should be EKKO’s spare parts to ensure reliability. The old parts, such as
oils and fuels must be handled in accordance with the relevant environmental
protection rules.
3.5.6 Hazardous area:
Hazardous area usually refers to the following range:
forklift or its load lifting devices (e.g. fork or accessories) is dangerous for
personnel when running or lifting, or the ongoing regional transport loads.
Typically, this range extends to the load or vehicle accessories landing area.
3.5.7 Risk environment:
When working in high-risk environment, you must
have a safety gear for protection.
