13
○
10 When not driving, always maintain the foot on the pedal of the brakes.
Put the pallet fork in the lowest position, keep hands in the forklift, press the
safety switch, pull out the key.(Note never leave without using the brake lever
forklift).
3.4.2 The steering wheel angle adjustment
According to the individuals operating comforts. The steering wheel angle can be
adjusted . Adjustment method is as follows: Loosen the left hand of direction
column, adjust the steering wheel to the right position, then lock regulating
handle.
3.4.3 Accelerator pedal operation
Determine the forklift direction either forward or reverse. Toggle left side handle
in place, right on the foot pedal accelerator to drive forward or backward.
Continue pressing down on the pedal to desired forklift speed. Never pressed
down the foot accelerator completely down unless as necessary in a incline.
3.4.4 Brake pedal operation
When the forklift needs to be parked or to slow down, you can either lift off the
accelerator foot pedal or press on the foot brakes to slow down or stop.
3.4.5 The using of emergency power safety switch
If the forklift ever loses control or there is a malfunction, please press the red
emergency switch on the right console to immediately shut off. Determine the
fault or reason of loss of control. If all is safe and secure continue use by pulling
the red button upwards to engage in full functions.
3.4.6 The use of reversing beeper
For the safety of operations and pedestrians, this forklift is equipped with
reverse beeper to allow others of your reverse movement. Also recommended to
press the horn while reversing or around obstructed corners from line of sight of
others.
3.4.7 The operation of the control handles
