EKKO EK07S Series, Service Manual

Page: 9 / 38

7
Fault analyses
If the vehicle continues to malfunction, follow the instructions of the manual.
2.1 Common fault analysis
•
2.1.1
Hand and foot brake common faults and troubleshooting methods
fault cause maintenance
Cargo cannot be lifted
Excessive cargo weight
Lift only the maximum load as
shown on the nameplate
Battery discharge The battery
The lift fuse has failed Check and replace the lift fuse
The hydraulic oil level is too low
Check and finally fill with hydraulic
fluid
The spill
Check tubing and/or cylinder for
tightness
Sensor failure Check the sensor on the door rack
Oil leakage caused by
suction
Oil is too high Reduce oily
Stacker cannot
operate
The battery is charging
Fully charge the battery, then unplug
the main power plug from the power
supply
The battery is disconnected. Connect batteries correctly
The fuse is out of order
Check and eventually replace the
fuse
Battery discharge The battery
The emergency stop switch is activated
Insert and pull knob to eliminate
emergency stop switch function
The handle is in the operating area
First move the handle to the braking
area
Traffic is going in one
direction only
Traffic is going in one direction only Check accelerator and connector