EKKO EK07S Series, Service Manual

Page: 38 / 38

36
Fault Diagnosis menu
On the main menu, Select Diagnostics and press Select to access the Fault diagnosis menu. The Fault
diagnosis menu contains Present Errors current faults and Fault History historical faults
Note: Sometimes a fault caused by a temporary event captured in the circuit is not a system fault. You can
determine whether the fault exists by restarting the system and observing whether the fault disappears
automatically.
The historical faults folder lists all faults encountered after the last historical fault is cleared. By clearing the
fault content in the entire folder, you can record the historical faults again.
Programming menu
On the main menu, Select The Programming icon and press Select to access the menu. Save and restore
parameter Settings files (.cpf files) through programming menus
Clear All is used to Clear historical fault
folders. A function key is highlighted
only when there are historical failures in
the historical failures folder and grayed
out when there are no historical failures.
Save.cpf File (Save.cpf File)
Use the save. CPF file function in the programming
menu to back up the currently set parameters. You
can save as many.cpf files as you want, and you need
to name each.cpf file differently
Restore. CPF File (Restore.cpf File)