PC6-TANGO • CompactPCI
®
PlusIO • Intel® Atom™ E39xx Processor (APL-I SoC)
Feature Summary
Front Panel I/O (8HP)
<
Option 2 x M12 X-coded receptacles for Gigabit Ethernet (as replacement for RJ45)
CompactPCI® & CompactPCI® PlusIO Backplane Resources
<
PICMG® CompactPCI® 2.0 CPU card & system slot controller for J1 based 32-bit CompactPCI® systems
<
Support for up to seven CompactPCI® peripheral boards, 33/66MHz (PI7C9X112 PCIe to PCI bridge)
<
PICMG® CompactPCI® 2.30 J2 UHM connector according to CompactPCI® PlusIO
<
J2 can be used to enable CompactPCI® Serial peripheral card slots for hybrid systems with a split backplane
<
J2 can be used alternatively for a rear I/O module e.g. PR1-RIO
<
J2 is assigned to 4 x PCIe Gen2 5GT/s (from APL SoC), 1 x SATA 6G/3G* (from Marvell SATA controller), 4 x
USB2 ports (from APL SoC), 2 x Gigabit Ethernet (optional I210IT networking controllers)
* CompactPCI® PlusIO specifies SATA 3G over J2. SATA 6G may be functional but is not guaranteed. The
Marvell SATA RAID controller port available via J2 is therefore configured for 3Gbps by default.
Local Expansion
<
Mezzanine side card connectors for optional local expansion
<
P-EXP - LPC, Audio, 2 x USB2, I2C, UART Rx/Tx (from APL SoC)
<
P-HSE - 2 x SATA 6G (port 1 from APL SoC, port 2 from optional PCIe to SATA controller 88SE9170)
<
4HP Low profile mezzanine module options (to be ordered separately)
<
CFast™ Card with C41-CFAST mezzanine module
<
SATA 1.8-Inch Solid State Drive with C42-SATA mezzanine module
<
Dual mSATA SSD with C47-MSATA mezzanine module
<
Dual M.2/NGFF SATA SSD 2230 - 2280 size with C48-M2 mezzanine module
<
Custom specific module design
<
8HP Mezzanine side card option (to be ordered separately)
<
2.5-inch SATA SSD/HDD available with C44-SATA
<
Side cards available with LPC Super I/O functionality (e.g. to be used for UART RS-232)
<
Custom specific side card design
© EKF -14- ekf.com
