User Guide • PC3-ALLEGRO • CompactPCI
®
PlusIO CPU Board • Intel® i7-3xxx Processor
Loading UEFI BIOS Setup Defaults (P-GP)
The jumper P-GP may be used to reset the UEFI BIOS configuration settings to a default state. The UEFI
BIOS on PC3-ALLEGRO stores most of its settings in an area within the BIOS flash, e.g. the actual boot
devices. Using the jumper P-GP is only necessary, if it is not possible to enter the setup of the BIOS. To
reset the settings mount a jumper on P-GP and perform a system reset. As long as the jumper is
stuffed the BIOS will use the default configuration values after any system reset. To get normal
operation again, the jumper has to be removed.
P-GP
Function
Jumper Removed
1)
Normal operation
Jumper Installed
BIOS configuration reset performed
1)
This setting is the factory default
1
P-GP
© EKF -59- ekf.com
