User Guide • PC3-ALLEGRO • CompactPCI
®
PlusIO CPU Board • Intel® i7-3xxx Processor
On-Board Connectors & Sockets
J-EXPT
J-EXPB
1)
Utility EXPansion Interface Connector (LPC, USB, HD Audio, SMBus), available either
from top (T) or bottom (B
)
1)
of the board, interface to optional side board
J-HSE
High Speed Expansion Connector (4 x SATA, 4 x USB), interface to optional low
profile mezzanine module or side board
J-PCIE
PCI Express® Expansion Interface Connector, interface to optional side board
J-SDVO
Digital Display Interface Connector (DisplayPort)
J1/J2
CompactPCI
Bus 32-bit (universal V(I/O)), 33MHz, PlusIO
SODM1
204-pin DDR3 ECC Memory Module SDRAM PC3-12800 Socket (ECC SODIMM)
XDP
CPU Debug Port
1)
1)
Connector populated on customers request only
Pin Headers
P-FPH
Pin header suitable for Front Panel Handle switch cable harness
P-ISP
PLD glue logic device programming connector, not populated
Jumpers
DS-P
Switches to configure link width and speed on J-PCIE
P-GP
Jumper to reset UEFI BIOS Setup to EKF Factory Defaults
P-MFG
Jumper to enter Manufacturing Mode, not populated
P-RTC
Jumper to reset RTC circuitry (part of PCH), not populated
© EKF -17- ekf.com
