Technical Information C23-SATA • PCIe to SATA RAID Controller Mezzanine Card
© EKF -20- ekf.com
Removing the Board
Warning
This procedure should be done only by qualified technical personnel. Disconnect the system from its
power source before doing the procedures described here. Failure to disconnect power, or
telecommunication links before you open the system or perform any procedures can result in personal
injury or equipment damage.
Typically you will perform the following steps:
C
Switch off the system, remove the AC power cord
C
Attach your antistatic wrist strap to a metallic part of the system
C
Identify the board, be sure to touch the board only at the front panel
C
unfasten both front panel screws (top/bottom), unlock the ejector lever
C
Carefully remove any board to system cabling assembly
C
Activate the ejector lever
C
Remove the card assembly carefully (be sure not to damage components mounted on the
bottom side of the board by scratching neighboured front panels)
C
Store board assembly in the original packaging, do not touch any components, hold the board
at the front panel only
Warning
Do not expose the card to fire. Battery cells and other components could explode
and cause personal injury.
