Technical Information C23-SATA • PCIe to SATA RAID Controller Mezzanine Card
© EKF -7- ekf.com
C23-SATA Features
Feature Summary
Feature Summary
Form Factor
Single size cropped Eurocard (112x100mm
2
), needs 4HP (20.3mm) mounting space in
addition to CPU carrier board, typically delivered as a ready to use assembly unit (including
the CCG-RUMBA or successor CPU card), provided with a common 8HP front panel shared
with the CPU board, mounting position right (on top of CPU board)
SATA/PATA
3
<
JMB363 PCIe to 2 x SATA II / 1 x PATA controller
<
RAID level 0/1 capable, drivers RAID or non-RAID
<
SATA/PATA connectors for system internal usage
LPC Super-I/O
3
(SIO2)
<
SCH3114, 4 serial ports, PS/2 keyboard & mouse port
<
Up to three serial COM ports RS-232 available from the front panel (9-position
male D-Sub connectors)
<
COM-A configurable as either RS-232 or RS-485 compliant
<
COM-B & COM-C conform to RS-232
<
COM-C may be replaced by Audio I/O female D-Sub connector (option)
<
SP4 available for attachment of an EKF CU-Series PHY module (TTL-level COM-Port
on 10-position pin header)
Firmware Hub
3
(FWH2)
<
82802 generic device, 8Mbit Flash, LPC interface
<
Can be configured (jumper) as secondary or primary (boot code) FWH
TPM
3
<
Option Trusted Platform Module cryptographic chip according to TPM 1.2
<
Infineon or Atmel brand (standard footprint)
Audio Codec
2, 3
<
Option AC'97 audio codec ALC203
<
Alternate Option HD Audio Codec ALC262
<
Realtek driver available
<
On-board 10-position pin header
<
Option front panel audio connector (replaces COM-C)
Front Panel
Connectors
1
<
3 x COM port connectors (9-position male D-Sub) COM-A COM-B COM-C
<
Option Audio connector (9-position female D-Sub), replaces COM-C
Host I/F Connectors
(to CPU Carrier)
1
<
PCI Express interface (PCIe x 1) high speed connector
<
Multifunction expansion interface (LPC, USB, SMB)
On-Board I/O
Connectors
1
<
Option PATA (IDE) 40-position pin header, horizontal oder vertical
<
2 x Latched SATA headers 7-pos.
<
Option PS/2 keyboard/mouse 10-position pin header
<
USB receptacle for system internal usage
<
Option pin header suitable for low profile USB Solid State Drive (SSD) module
<
Option serial port header (TTL-level)
<
Option Audio I/O 10-position pin header
<
Reset
On-Board Jumpers
1
<
Reset
<
Firmware Hub selection
<
COM-A configuration RS-232 or RS-485
<
RS-485 Termination resistors
On-Board Functions
Speaker, LEDs, SMBus EEPROM, temperature sensors
