Technical Information C23-SATA • PCIe to SATA RAID Controller Mezzanine Card
© EKF -22- ekf.com
Technical Reference - Connectors
Caution
Some of the connectors may provide operating voltage (e.g. +12V, +5V and +3.3V) to devices inside
the system chassis, such as internal peripherals. Not all of these connectors are overcurrent protected.
Do not use these connectors for powering devices external to the computer chassis. A fault in the load
presented by the external devices could cause damage to the board, the interconnecting cable and
the external devices themselves.
Please Note
The C23-SATA mezzanine module may be equipped with several on-board connectors for system
internal usage. Not all of these connectors may be present on a particular board. Be sure to specify
your individual needs when ordering the C23-SATA board. Characteristic features and the pin
assignments of each connector are described on the following pages (connector designation in
alphabetical order within the groups 'front panel connectors', 'on-board connectors', 'inter-board
connectors', and 'rear I/O connectors').
