Technical Information C23-SATA • PCIe to SATA RAID Controller Mezzanine Card
© EKF -17- ekf.com
Jumpers
J-FWH
1
Jumper 2.54mm, determines if the optional on-board firmware hub is acting as
boot BIOS (jumper set) or as secondary BIOS (jumper removed = default).
J-RES
1
Jumper 2.54mm, allows to force a CPU debug reset on the CCG-RUMBA CPU carrier
board
J-SER
Jumper array, determines behaviour of COM-A (RS-232 or RS-485)
1
Not all of these jumpers may be present or functional on your actual C23-SATA board. Assembly of these jumpers
is highly custom specific. Discuss your needs with EKF before ordering.
Inter-Board Connectors
P-EXP
Dual row socket, available from bottom of the C23-SATA PCB, matching with the
corresponding socket on the CPU carrier board, connected through a board stacker,
comprising of:
•
LPC Low Pin Count interface
•
AC'97 Audio or HD Audio
•
2 x USB
•
SMB, Speaker, Reset
P-PCIE
High speed socket edge card connector, available from bottom of the C23-SATA PCB,
matching with the corresponding socket on the CPU carrier board, connected through a
high speed strip line PCB (EKF C21 or C26, depends on CPU carrier board), comprising of:
•
Host CPU (ICH southbridge) PCI Express (PCIe) x 1 interface
Please note:
Not all of the connectors or other elements listed above may be present or functional on your actual
C23-SATA board. Assembly of these connectors is highly custom specific. Discuss your needs (target
application) with EKF before ordering, for an optimum board configuration.
