eka EKF 616G UD Original Operating And Instruction Manual Download Page 24

TECNOEKA Srl _____________________________________________________________ use and instruction manual 

page. 24 __________________________________________________________________________________________ 

9.  The Warranty 

 

Your appliance is covered by warranty. The seller will replace or repair (and his decision will be final), free 
of charge for the customer, only those parts that are defective due to a manufacturing fault on condition 
that, under penalty of forfeiture: 

 

for domestic equipment, the customer notifies the fault within two months from the date when 

he/she discovered it and anyway within 2 years form the date of purchase; 

 

for  professional  equipment,  the  customer  notifies  the  fault  within  8  days  from  the  date  when 
he/she discovered it and anyway within 12 months from the date of purchase, 

enclosing a copy of the invoice or receipt proving the purchase. 
 
Apart from the case when the customer cannot produce the invoice or receipt proving the purchase or 
when  the  above-mentioned  terms  are  not  complied  with,  the  warranty  is  expressly  excluded  in  the 
following cases: 

1)

 

faults or breakage caused by the transport; 

2)

 

wrong or incorrect installation of the product (for instance because of insufficient draught of the 

flue  or    exhausts)  in  light  of  the  instructions  given  in  the  user’s  handbook  supplied  with  the 
product; 

3)

 

inadequate or abnormal electrical, hydraulic and/or gas supplies; 

4)

 

carelessness, negligence or incompetence in using the product in light of the instructions given in 

the user’s handbook supplied with the product; 

5)

 

use of the product for uses different from the one for which it was built or anyway in a manner 

not compliant with the instructions given in the user’s handbook supplied with the product; 

6)

 

tampering with the product; 

7)

 

adjustments  and/or  maintenance  and/or  repairs  carried  out  by  unauthorised  personnel  and/or 

with non original spare parts; 

8)

 

inadequate or careless maintenance of the product in contrast with the user’s handbook supplied 

with the product; 

9)

 

damages caused by fire, natural disasters and accident as well as by any cause not attributable to 

TECNOEKA SRL. 

 
In  addition  painted  or  enamelled  parts,  knobs,  handles,  mobile  or  removal  plastic  parts,  light  globes, 
glass parts, refractory stones, electronic parts and any accessory parts and transport from the consumers, 
final  user  and/or  purchases  location  to  Tecnoeka  srl  and  vice  versa  are  excluded  from  the  warranty.  
Replacement costs of the oven and relative installation expenses are also excluded from the warranty. 
TECNOEKA  SRL  cannot  be  held  responsible  for  any  damages,  either  direct  or  indirect,  caused  by  the 
product breaking down or following its non-use. 
Any repairs carried out during the warranty do not cause said warranty to be extended or renewed. 
Nobody  is  authorised  to  modify  the  terms  and  conditions  of  the  warranty  or  to  issue  new  verbal  or 
written warranties. Any dispute shall be settled by the competent Court in Padua. 

 

Warning for the Buyer: 

 

1.

 

the  cooking  appliance  is  designed  only  for  cooking  purposes  while  the  heating  appliance  is 
designed only for heating domestic environments; 

2.

 

TECNOEKA S.r.l. does not install the appliances; the seller shall be responsible for any installation 
carried out; 

3.

 

TECNOEKA S.r.l. cannot be held responsible for any damages, either direct or indirect, to people, 
pets or property caused by the appliance breaking down or following its non-use. 

 
The  Manufacturer  cannot  be  held  responsible  for  any  inaccuracies  due  to  misprints  or  mistakes  in 
copying in this handbook. The Manufacturer reserves the right to modify the products as he deems fit, 
also in the interest of the user, without affecting the vital characteristics of functionality and safety. 

10 Availability and supply of spare parts 

TECNOEKA SRL keeps and ensures the availability of spare parts for a maximum of 24 months 
from the date of the sales invoice of the finished product to the dealer. Availability cannot be 
guaranteed after said period.

 

Summary of Contents for EKF 616G UD

























Reviews: