Electronic Ovens rev. 0 _________________________________________________________________EKF 523 E UD
_________________________________________________________________________________________ page 13
3.2.7
3.2.7
3.2.7
3.2.7 Selecting cooking program number
Selecting cooking program number
Selecting cooking program number
Selecting cooking program number
To select the cooking program number (there are 99 programs in all) press the push button
(from 1 to 99) or the push button
(from 99 to 1). The selected program number is shown on
disp
disp
disp
display programs.
lay programs.
lay programs.
lay programs. To rapidly view the programs keep the push button pressed.
3.2.8
3.2.8
3.2.8
3.2.8 Motors at
Motors at
Motors at
Motors at
½
speed function
speed function
speed function
speed function
To activate this function press the push button
. When the green led lights up it confirms the
activation. This function remains operative until the push button is pressed a second time. If this
function is included in one of the four cooking stages, the passage to the next cooking stage is
automatically deactivated. This function cannot be activated during a programmed cooking
This function cannot be activated during a programmed cooking
This function cannot be activated during a programmed cooking
This function cannot be activated during a programmed cooking
cycle.
cycle.
cycle.
cycle. By halving the speed of the motors (fans), the heating capacity is halved too and therefore
the cooking times and the amount to be cooked must be adjusted. (The different noise of the
motors is quite normal at reduced speed).
3.2.9
3.2.9
3.2.9
3.2.9 Stop motors function
Stop motors function
Stop motors function
Stop motors function
To activate this function press the push button
. When the green led lights up it confirms the
activation. This function remains operative until the push button is pressed a second time.
If this function is included in one of the cooking stages, the passage to the next cooking stage is
automatically deactivated. This function can be activated and deactivated at any time, even
This function can be activated and deactivated at any time, even
This function can be activated and deactivated at any time, even
This function can be activated and deactivated at any time, even
during a programmed cooking cycle.
during a programmed cooking cycle.
during a programmed cooking cycle.
during a programmed cooking cycle.
When the motors (fans) are stopped, the heating elements and climate regulation are
deactivated, therefore if this function is included in a program, it can be used to delay the start
of the cooking cycle or as a pause during the cycle (for leavening the product inside the cooking
chamber).
3.2.10
3.2.10
3.2.10
3.2.10
Pre
Pre
Pre
Pre----heating function
heating function
heating function
heating function
To activate this function press the push button
. When the green led lights up it confirms the
activation. The function is automatically deactivated when the pre
The function is automatically deactivated when the pre
The function is automatically deactivated when the pre
The function is automatically deactivated when the pre----heating temperature is
heating temperature is
heating temperature is
heating temperature is
reached,
reached,
reached,
reached, otherwise, it can be deactivated by pressing the push button during a cooking stage
(the oven pre-heating can be cut off at any time).
If this function is activated in a programmed cooking cycle, it is not stored with the other
parameters of the program and, therefore, it must be activated each time a new cooking cycle
is started: either programmed or manual. The f
The f
The f
The function adds a temperature delta
unction adds a temperature delta
unction adds a temperature delta
unction adds a temperature delta
∆
∆
∆
∆
only to the
only to the
only to the
only to the
temperature that was set in the first stage of the cooking cycle,
temperature that was set in the first stage of the cooking cycle,
temperature that was set in the first stage of the cooking cycle,
temperature that was set in the first stage of the cooking cycle, to compensate any heat loss
caused by opening the oven door to introduce the food.
If this stage is activated, when the cooking cycle starts the time display shows the wording
“HEAt”. As soon as the pre-heating temperature is reached a beeper sounds, which stops only
when the oven door is opened for introducing the food (the wording “HEAt” continues
flashing). When the door is closed, the programmed cooking cycle starts automatically and the
time display shows the set cooking time.
3.2.11
3.2.11
3.2.11
3.2.11 Storing programs
Storing programs
Storing programs
Storing programs
Select the program number you wish to store. Set the parameter sequence: time/temperature
and climate for each of the four cooking stages. Press the push button
until the beeper
informs you it has been stored. To cancel a stored program, just replace it with a new one with
the same number, containing the new parameters for the four cooking stages. The new
program must then be stored.
