TECNOEKA Srl _____________________________________________________________ use and instruction manual
page 12 _________________________________________________________________________________________
3.2.2
3.2.2
3.2.2
3.2.2 Programming cooking time
Programming cooking time
Programming cooking time
Programming cooking time
To set the cooking time (from 1 minute to 4 hours) use the knob no. “1”. The set values can be
seen on the time display.
time display.
time display.
time display.
3.2.3
3.2.3
3.2.3
3.2.3 Programming cooking temperature
Programming cooking temperature
Programming cooking temperature
Programming cooking temperature
To set the cooking temperature (between 50°C and 270 °C in the cooking chamber and
between 0°C and 100°C for the “
∆
T” and the core probe) use the knob no. “2”. The set values
can be seen on the temperature display.
temperature display.
temperature display.
temperature display.
3.2.4
3.2.4
3.2.4
3.2.4 Programming cooking climate
Programming cooking climate
Programming cooking climate
Programming cooking climate
To set the cooking climate (dry or steam) use knob no. “3”. The set value in percentage is
shown on the led bar
led bar
led bar
led bar formed of: 10
10
10
10 blue leds
blue leds
blue leds
blue leds (from 10 to 100%) for the steam
steam
steam
steam selection (turn
the knob in an anti-clockwise direction). The white led shows when the climate function is not
activated.
3.2.5
3.2.5
3.2.5
3.2.5 Selecting cooking stage
Selecting cooking stage
Selecting cooking stage
Selecting cooking stage
To select the cooking stage (from 1 to 4) press the push button
. When the green led lights
up it shows the stage has been selected. The required cooking parameters (time/temperature/
The required cooking parameters (time/temperature/
The required cooking parameters (time/temperature/
The required cooking parameters (time/temperature/
climate) can be set for each selected stage.
climate) can be set for each selected stage.
climate) can be set for each selected stage.
climate) can be set for each selected stage. The push button can be pressed at any time to
check the time for each cooking stage.
When the oven is operating, the remaining cooking time can be seen for all 4 stages on the
time display (the flashing led shows which cooking phase is actually in progress).
An “infinite” time can be set in the 1
st
and 4
th
stages (turn the knob no. “1” in an anti-
clockwise direction): the time display shows the wording “inF
inF
inF
inF ” (1
st
stage) or “HoLd
HoLd
HoLd
HoLd” (4
th
stage –
which is useful for keeping the food hot when it is cooked). The other stages cannot be selected
in these cases.
3.2.6
3.2.6
3.2.6
3.2.6 Selecting cooking temperature
Selecting cooking temperature
Selecting cooking temperature
Selecting cooking temperature
To select the cooking temperature (in the cooking chamber / core probe ”
∆
T”) press the push
button
. When the green led lights up it shows the selected temperature, which can be seen
on the temperature display
temperature display
temperature display
temperature display.
Temperature in the cooking chamber
Temperature in the cooking chamber
Temperature in the cooking chamber
Temperature in the cooking chamber:
When the oven is turned on the temperature in the
cooking chamber is automatically selected (led alight on ) . To set the required level turn knob
no. “2”. When the oven is operating, the set temperature (led alight on ) and the current
temperature in the cooking chamber (led alight on
) are alternatively displayed.
Core temperature in the food
Core temperature in the food
Core temperature in the food
Core temperature in the food:::: To set the temperature for cooking inside the food, press the
push button
until the led next to the
symbol lights up and then turn knob no. “2”.
When the oven is working (with the needle probe inside the food) the set temperature (led
alight on
) and the current temperature inside the food (led alight on
) are alternatively
shown.
∆
∆
∆
∆
T temperature (DELTA
T temperature (DELTA
T temperature (DELTA
T temperature (DELTA----T)
T)
T)
T): To set the temperature for the “
∆
T” function, press the push button
until the led lights up next to the
∆
∆
∆
∆
T
TT
T symbol and then turn knob no. “2”. When the oven is
working (with the needle probe inside the food) the current temperature in the cooking
chamber (led alight on
) and the set temperature for “
∆
T” (led alight on
∆
∆
∆
∆
T
TT
T) are alternatively
shown.
N.B.:
N.B.:
N.B.:
N.B.: If the cooking chamber temperature and the core temperature for the food are set, the “
∆
T”
temperature function is automatically deactivated.
If the core temperature for the food is set and then the “
∆
T” temperature, the cooking chamber
temperature function is automatically deactivated.
