Page 20 of 25
9. Technical Data
Vario Engraver VE 600
x-y unit:
Flatbed engraver
Maximum engraving surface:
A3: 440 mm x 305 mm/17.32 inch x 12.01 inch,
A4: 220 mm x 305 mm/8.66 inch x 12.01 inch
Engraving speed:
max. 20 mm/s / .79 inch/s
Interfaces:
USB Level 2.0
Command language:
based on HP-GL 7475A
Data buffer:
16 MB
Drive:
Two-phase stepper motor
Addressable resolution:
.01 mm / .0004 inch
Repetition precision:
.05 mm / .002 inch
Voltage supply:
100-240V AC 50-60Hz
Input current:
.7 A max.
Ambient conditions:
Operation: 10°C - 35°C / 50°F - 95°F
35% - 75% rel. air humidity
Storage: -10°C - 50°C / 14°F - 122°F
10% - 90% rel. air humidity
Safety certificates:
EN 60950-1
Operational reliability:
EN 55022 B
EN 61000-4-2 bis 6
EN 61000-4-11
Dimensions:
A3: 660 mm (A4: 440 mm)x 440 mm x 125 mm/
25.98 inch(A4: 17.32 inch)x 17.32 x 4.92 inch
Weight:
A3: approx. 8,85 kg / 17.64 inch,
A4: approx. 7 kg / 15.43 inch
Engraving spindle
Rotational speed:
min. 5000 RPM, max. 50.000 RPM
Torque:
6 Ncm
Frequency:
83-830 Hz
Power consumption: max. 60 W
Clamping jaws:
Shaft diameter 3 mm / .12 inch;
Clamping mechanism:
Head gripping
Concentricity with clamping jaws: .03 mm / .001 inch
Motor design: Three-phase AC asynchronous, brushless
Housing:
Aluminum
Clamping diameter:
25 mm / .98 inch
Ball bearing type: Steel, permanent lubrication, two-fold
Cooling: Self-ventilating with integrated fan
Weight:
approx. 280 g / .62 lbs
Overall length:
approx. 175 mm /6.89 inch
Scope of use:
Exclusively for engraving
Guaranteed bearing service life: min. 1000 hours with appropriate use
