Eizo FLEXSCAN F980, User Manual

Page: 10 / 58

10
INTRODUCTION
Rear
Controls & Connectors
Front
BNC/D-SUB Selection
Button
Selects BNC or D-Sub
connector as active input.
This feature is only used
when two computers are
connected to the monitor.
Power Terminal Covers for the Optional
i·Sound Sound Unit
Power Switch
Power Indicator
Indicates the power-on status, as
follows:
Green:
Power is ON (normal mode)
Green: - PowerManager Mode 1
(Flashing) - Power is switching off
within 15
minutes. See page 34.
Yellow: PowerManager Mode 2
Yellow: Off Timer Mode
(Flashing) See page 34.
AUTO-SIZING Button
Automatically centers the
displayed image, bringing
the image borders into
alignment with the monitor
frame. See page 12.
QuickSet
™
Control Pad
(hereinafter “Control pad”)
USB Ports
(Upstream port x 1,
Downstream ports x 3)
See page 36 for further
details.
BNC input connector
Power Connector
D-Sub 13W3 input connector
USB Port with a
Drop Down Access
Lid (Downstream
port x 1)
See page 36 for
further details
Termination switch
Allows multiple monitors to be chained
together (Default termination is 75
Ω
).
Maintenance port
Allows EIZO optional
utilities to be attached.