Eizo FLEXSCAN F980, User Manual

Page: 23 / 58

23
2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER
E
Function
1) Open a www browser, e.g. Internet Explorer,
and the Pattern.html in the utility disk.
· For compensation, if this file is not
available, please open a window on the
Windows or Macintosh OS for alternative
use. Set the background to black, and
open a white window whose size is more
than 1/5 and less than 1/2 of the whole
display area. Refer to the picture on the
left.
2) Press the Color Correction icon. Press OK
and the monitor automatilcally starts the
compensation. It takes about 20 to 30
seconds to compensate the color tempera-
ture from 4000 K to 10000.
· All other adjustments are off during
compensation.
3) When the compensation finishsed, a long
beep sounds and “OK” appears on the
screen. If the compensation fails, four short
beeps shounds and “Error” appears. Both
“OK” and “Error” blinks.
4) Press any adjustment button on the fron
panel makes this message menu off.
· Please allow 30 minutes for the monitor to
warm up.
· Approximately 20 to 30 seconds are needed to
adjust Color Correction.
· Color Correction does not work properly when
the input signal level is lower than 0.5 Vp-p or
higher than 1.0 Vp-p.
· Please adjust contrast and color temperature
adjustment after Color Correction.
A U T O B N C /
D - S U B
White
Window
Pattern