EINHELL PS 13 Niro UKS, Operating Instructions Manual

Page: 10 / 52

10
GB
We cannot accept any liability for damage or
accidents which arise due to a failure to follow these
instructions.
Table of contents
1. Warnings
2. Device
description
3. Technical data
4. Supplied package
5. Assembly
6. Safety
information
7. Connect to the gas cylinder
8. Replace the gas cylinder
9. Starting
up
10. Shutting down
11. Storage / Care / Repair
12. Troubleshooting
1. Warnings
The party radiator is for outdoor use only.
Do not move the party radiator when it is in use.
Close the valve on the gas cylinder after use.
Some parts of the party radiator may become
very hot, keep children away from it.
Important. Do not make any technical
modifications to the party radiator as they may be
dangerous.
Important. Never use white spirit, petrol or similar
liquids to ignite or reignite the unit.
Read these instructions carefully before
installation and use
2. Description
The party heater is used outdoors to heat nearby
areas. A burner inside the perforated plate body
produces the necessary heat, which is radiated to the
immediate surroundings by an aluminium reflector as
well as by the perforated plate itself.
The party heater has to be set up on a level,
incombustible surface with no - or only a very slight -
gradient. Its center of gravity can be lowered
considerably by filling sand in the foot.
To make it easier to change the gas bottle, the body
can be raised and locked in place on the appliance
itself.
The party heater is designed to work only with
propane-butane (liquefied gas). It is connected
directly to the gas bottle by means of a DVGW-tested
and approved hose pipe and a liquefied gas regulator
(outlet pressure 28-30/37 mbar, capacity 1,5 kg/h).
The following regulations have to
be observed and adhered to when making the
connection:
Technical regulations concerning liquefied gas
(e.g. TRF)
Guidelines published by liability insurance
associations concerning the use of liquefied gas
in special applications
The party radiator is fitted with a tilt guard which stops
the gas supply before the angle has reached 45° from
the horizontal.
3. Technical data
Total height 2250 mm
Approx. reflector diameter 760 mm
Max. heat rating 13 kW (Hs)
Approx. connection rating 0.946 kg/h
Connection pressure 28-30/37 mbar
Countries of destination
BE/CH/ES/FR/GB/GR/IE/IT/PT
Type of gas Liquid gas (propane/butane)
Gas category I3+
Gas cylinder Camping 5 – 11 kg
Burner element Infinitely adjustable
Ignition Piezo ignition
The content of an 11 kg gas cylinder is sufficient for
running the burner at full capacity for approx. 11
hours.
4. Items supplied
Item 1 Reflector 1
Item 2 Burner assembly 1
Item 4 Column 1
Item 5 Washer 1
Item 6 Case with cover 1
Item 7 Case holder 3
Item 8 Foot 1
Anleitung PS 13 Niro UKS_SPK7:_ 14.06.2010 11:01 Uhr Seite 10