GB
12
not loosen your grip at any time.
Never leave your workplace without switching off
the saw first.
DO NOT ALLOW YOUR FAMILIARITY WITH
THE SAW TO TURN INTO CARELESSNESS. IT
TAKES ONLY FRACTIONS OF A SECOND FOR
CARELESSNESS TO RESULT IN SERIOUS
INJURIES.
Wear goggles
Wear ear-muffs
Wear a breathing mask
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
Cutting
Idling
Sound pressure level LPA
74,5 dB(A)
62,7 dB(A)
K
pA
uncertainty 3
dB
Sound power level LWA
87,6 dB(A)
75,7 dB(A)
K
WA
uncertainty 3
dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
5. Technical data
Asynchronous motor
230 V
50 Hz
Power rating
120 W
Operating mode
S2 5min.
Idle speed n0
400-1600 rpm
Protection type
IP 20
Stroke
21 mm
Tilting table
0° to +45° to the left
Table dimensions
410 x 253 mm
Blade length
127 mm
Throat depth
406 mm
Cutting height max. at 90°
57 mm
Cutting height max. at 45°
27 mm
Weight
12 kg
6. Before putting the machine into
operation
All covers and safety devices have to be properly
fitted before the machine is switched on.
It must be possible for the blade to run freely.
When working with wood that has been
processed before, watch out for foreign bodies
such as nails or screws etc.
Before you actuate the On/Off switch, make sure
that the saw blade is correctly fitted and that the
machineʼs moving parts run smoothly.
Before you connect the machine to the power
supply, make sure the data on the rating plate is
the same as that for your mains.
6.2 Mounting the saw on a workbench Fig. 2
1.
It is better to mount the saw on a solid wood
workbench rather than on a weak plywood stand
where vibrations and noise are certain to be a
nuisance.
2.
The tools and hardware needed to mount the
saw on a work bench are not supplied with the
saw. Be sure to use equipment of at least the
following size:
Item
Quantity
Hex screws M8
4
Gaskets Ø 8 mm
4
Washers Ø 8 mm
4
Hex nuts M8
8
2
Work table
Saw body
Foam rubber mat
Gasket
Washer
Hex screw
Lock nut
Hex nut
Anleitung DS 405-1 E:Anleitung DS 405-1 E 07.12.2010 9:26 Uhr Seite 12
