5. Care and maintenance
By observing the care and maintenance instructions,
you canensure a long useful life and trouble-free
operation of this quality tool.
Examine the magazine before beginning work and
ensure that it fits securely. Clean the tool thoroughly
immediately after use.
Staples can become jammed, especially if the
electric stapler is applied at an angle.
If this happens, immediately switch the electric
stapler off and remove the power plug from wall socket.
Caution: Always pull the plug out of the mains
socket before beginning any work on the electric
stapler!
• Removing jammed staples
To remove jammed staples you must first take the
entire magazine out of the stapler. First, pull out the
retaining pin as shown (figure 7).
You can then take out the entire magazine (figure 8).
Use a suitable set of pliers to carefully remove the
jammed staples.
Reassemble the stapler by carrying out the
above steps in reverse order.
Before putting the stapler into operation again, be
sure that the magazine is inserted properly and
securely and that the retaining pin is passed
completely through the hole.
GB
5
8
7
Anleitung BET 750_GB,FIN,I 29.10.2001 11:03 Uhr Seite 5
