GB
Dear Customer,
Before operating the electric stapler for the first time,
please read these instructions and observe the
information provided with regard to its operation and
maintenance.
Please keep these instructions near the tool at all
times.
1. Items supplied
1 electric stapler
1000 staples
1000 nails
2. Technical data
Mains power supply
230 V 50 Hz
Firing rate
20 shots/min.
Staple width
10 mm
Staple length
8 - 16 mm
Staple thickness
0.7 mm
Nail length
8 - 16 mm
Nail thickness
0.7 mm
Weight
0.95 kg
Totally insulated
Please note:
Wear proper protective clothing, especially
safety goggles, whenever you work with the
stapler.
Please observe the safety instructions.
3. Proper use
The electric stapler is designed for tacking and
fastening textiles, leather and wood with suitable
staples and nails.
The electric stapler is designed for temporary
operation. It heats up when operated continuously.
This increasing heat reduces the performance of the
stapler.
If the electric stapler begins to heat up, turn it off and
allow it to cool down.
CAUTION!
For your own safety, use only the staples and
nails indicated in these operating instructions.
Using other staples and nails can create an injury
hazard.
Always disconnect the tool from the power
supply when it is not being used and before
beginning maintenance work or refilling staples
or nails!
4. Putting into operation
• Inserting the staples, figures 1-3
Switch the electric stapler off and remove the power
plug from the wall socket.
Press the magazine lock and push it downward
(figure 1).
Pull the magazine pusher back and out of the stapler
(figure 2).
3
2
1
Anleitung BET 750_GB,FIN,I 29.10.2001 11:03 Uhr Seite 3
