background image

EN

- 10 -

Battery C Disposal

Disposal

Should your appliance need replacement after 

extended use, do not dispose of it with the 

household refuse, but in an environmentally safe 

way.

Waste produced by electrical machine 

items should not be handled like normal 

household rubbish. Please recycle where 

recycle facilities exist. Check with your local 

authority or retailer for recycling advice.

Always dispose of your battery pack according 

to federal, state, provincial and local regulations. 

Contact a recycling agency in your area for recycling 

locations.

 CAUTION

! Even discharged battery packs 

contain some energy. Before disposing, use 

electrical tape to cover the terminals to prevent 

the battery pack from shorting, which could cause 

fi

 re or explosion.

 WARNING!

 To reduce the risk of injury or 

explosion, never burn or incinerate a battery 

pack even if it is damaged, dead, or completely 

discharged. When burned, toxic fumes and 

materials are emitted into the surrounding 

atmosphere.

1.   Batteries vary according to device. Consult 

your manual for speci

fi

 c information.

2.   Install only new batteries of the same type in 

your product (where applicable).

3.   Failure to insert batteries in the correct 

polarity, as indicated in the battery 

compartment or manual, may shorten the life 

of the batteries or cause batteries to leak.

4.   Do not mix old and new batteries.

5.   Do not mix Alkaline, Standard (Carbon-Zinc), 

or Rechargeable (Nickel Cadmium, Nickel 

Metal Hydride, or Lithium-Ion) batteries.

6.   Do not dispose of batteries in 

fi

 re. 

7.   Batteries should be recycled or disposed of 

as per state, provincial and local guidelines.

When shipping or disposing of batteries and 

cordless tools, always ensure that they are 

packed individually in plastic bags to prevent 

short circuits and 

fi

 res. 

SAVE THESE INSTRUCTIONS

2. Layout and items supplied

2.1 Layout

1. Torque 

selector

2.  Battery capacity indicator

3. Changeover 

switch

4. On/O

  switch

5.  Lithium-Ion battery pack 

(not included in 4513945)

6.  Battery capacity indicator button 

7.  Selector switch for 1st gear – 2nd gear

8. Pushlock 

button

9.  Quick-change drill chuck

10. LED lamp

11. Chuck opening

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

store where you made your purchase at the latest 

within 5 work days after purchasing the article and 

upon presentation of a valid bill of purchase. 

• 

Open the packaging and take out the 

equipment with care.

• 

Remove the packaging material and any 

packaging and/or transportation braces (if 

present).

• 

Check to see if all the items are supplied.

• 

Inspect the equipment and accessories for 

transport damage.

• 

If possible, keep the packaging until the end 

of the guarantee period.

Danger!

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, plastic sheets and small parts. There is 

a risk of choking and su

 ocating!

• 

 Cordless Drill Driver

• 

Original operating instruction with safety 

information

Separately available accessories

18V 1.5Ah PXC Lithium-Ion battery

18V 2.0Ah PXC Lithium-Ion battery

18V 2.5Ah PXC Lithium-Ion battery

18V 3.0Ah PXC Lithium-Ion battery

18V 4.0Ah PXC Lithium-Ion battery

18V 3.0Ah PXC Plus Lithium-Ion battery

18V 4.0Ah PXC Plus Lithium-Ion battery

18V 5.2Ah PXC Plus Lithium-Ion battery

18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery

Anl_TE_CD_18_40_Li_SPK7_USA.indb   10

Anl_TE_CD_18_40_Li_SPK7_USA.indb   10

28.04.2022   09:09:26

28.04.2022   09:09:26

Summary of Contents for 4513945







































Reviews: