Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
Layout (Fig. 1)
1
Saw table
2
Saw blade guard
3
Push stick
4
Saw blade
5
Splitter
6
Table insert
7
Parallel stop
8
Motor
9
Power cable
10 Stand
11 On/Off switch
12 Star-grip screw for parallel stop
13 Scale for angle settings
14 Star-grip screw for height adjustment
15
Screw for saw blade guard
2. Items supplied
앬
Carbide-tipped saw blade
앬
Parallel stop
앬
Push stick
앬
Bench-type circular saw
앬
Cross stop
3. Proper use
The bench-type circular saw is designed for the
slitting and cross-cutting of all types of timber,
commensurate with the machine’s size. The machine
is not to be used for cutting any type of roundwood.
The machine is to be used only for its prescribed
purpose.
Any use other than that mentioned is considered to
be a case of misuse. The user/operator and not the
manufacturer shall be liable for any damage or injury
resulting such cases of misuse. The machine is to be
operated only with suitable saw blades. It is
prohibited to use any type of cutting-off wheel.
To use the machine properly you must also observe
the safety regulations, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the machine have
to be acquainted with this manual and must be
informed about its potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area.
The same applies for the general rules of
occupational health and safety.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed it is
still impossible to eliminate certain residual risk
factors. The following hazards may arise in
connection with the machine’s construction and
design:
앬
Contact with the saw blade in the uncovered saw
zone.
앬
Reaching into the running saw blade (cut
injuries).
앬
Kick-back of workpieces and parts of workpieces
앬
Saw blade fracturing.
앬
Catapulting of faulty carbide tips from the saw
blade.
앬
Damage to hearing if essential ear-muffs are not
worn.
앬
Harmful emissions of wood dust when the
machine is used in closed rooms.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Important notes
Please read this manual carefully and pay attention
to the information provided. Use this manual to
familiarize yourself with the machine, its correct use
and safety regulations.
The corresponding safety information can be found
in the enclosed booklet.
GB
10
Anleitung_NTS_800_SPK7:_ 01.02.2011 14:46 Uhr Seite 10