9
GB
Adjustment of the splitter
1. Open the hinged guard hood and hold.
2. Release screws 1.
3. Adjust splitter 2 and tighten again.
Adjustment of the cutting angle
1. Release the lock screws 1
2. Adjust the shoe to the desired angle between 0 and 45°.
3. Tighten the lock screws 1.
Changing the saw blade
1. Open the hinged guard hood 1 and hold.
2. Hold up flange 4 using the pin-type wrench 2.
3. Apply socket wrench 3 and release screw.
4. Remove the flange 4 and saw blade by dropping
downwards.
5. Clean the flange and insert a new blade. Note the direction
5.
of rotation (see arrow on the guard hood).
6. Tighten the head bolt and check for concentricity.
Important!
Pull out the plug before
making any changes to the
circular saw!
Switching on
Before pressing the On/Off
switch, check that the saw blade
is properly fitted, that the moving
parts run smoothly and that the
clamping screws are tight.
Switching on and off
To switch on: Press the lock button 3 and the button 4
simultaneously.
To switch off:
Release the lock button 3 and the button 4
1
1
3
2
4
2
1
3
4
Anleitung HKS 55 -4 sprachig 13.11.2001 13:38 Uhr Seite 9