GB
- 18 -
3. Proper use
The machine is designed for polishing coated
surfaces and for sanding wood, iron, plastic and
similar materials using the appropriate abrasive
paper.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Improper use
All applications with the device which are not sta-
ted in the chapter “Intended use” are deemed to
be contrary to the intended use.
The device must not be used for the following
purposes:
•
Working on coatings containing lead and
working on types of wood and metal which
generate harmful or toxic dust
•
Sharpening, engraving with corresponding
attachments
•
Working on materials containing asbestos
•
Use in areas where there is a risk of explosion
•
Sanding on damp walls
There is a risk of injury.
The user of the device is liable for all damage to
property and personal injuries arising as a result
of incorrect use.
If any other components or non-original
components are used on the machine, the
manufacturer’s guarantee shall become void.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment’s
construction and layout:
•
Contact with the unguarded wheel (injuries
through cutting)
•
Reaching into the wheel while it is still rotating
(injuries through cutting)
•
Catapulting of parts of the wheel (injuries
through cutting or bruising)
•
Catapulting of parts of the material being pro-
cessed (injuries through cutting or bruising)
•
Risk of fire from flying sparks
•
Damage to hearing if the compulsory hearing
protection is not used (hearing loss)
•
Inhalation of abrasive particles from the mate-
rial and wheel
•
Electric shock upon contact with non-insula-
ted electrical parts
If the instructions listed in the operating instruc-
tions are not adhered to, improper handling of the
equipment may result in other residual risks
4. Technical data
Operating voltage: .................................. 18 V DC
Speed n: .......................................500-3000 min
-1
Polishing disk
∅
: .................................... 180 mm
Connection thread: ...................................... M14
Protection class: ................................................III
Weight: .......................................................1,6 kg
Important!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power X-
Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power X-charger.
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 60745-1, EN 60745-2-3.
L
pA
sound pressure level ..................... 71,7 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ....................... 82,7 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-mu
ff
s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 60745-1, EN 60745-2-3.
Anl_CE_CP_18_180_Li_E_Solo_SPK13.indb 18
Anl_CE_CP_18_180_Li_E_Solo_SPK13.indb 18
11.04.2022 13:14:24
11.04.2022 13:14:24
