GB
- 22 -
11. Troubleshooting
Fault
Possible cause
Remedy
The compressor
does not start up
- The battery is empty
- The device is not switched on
- The set pressure is too low
- The On/O
ff
/Automatic switch (Fig.
1 / Item 7) is not pressed
- Charge the battery
- Press the button Fig. 7 / Item 9b
- Set a higher pressure
- Press the On/O
ff
/Automatic switch
The compressor
does not switch o
ff
- Press the “Manual” switch
- To switch o
ff
, let go of the switchn
The pressure is set
but the compressor
does not switch o
ff
at the set value
- The “Manual” switch (Fig. 6 / Item 7b)
is
pressed
- To switch o
ff
, let go of the switch
- For automatic mode see section
6.4. point a)
Anl_CE_CC_18_Li-Solo_SPK13.indb 22
Anl_CE_CC_18_Li-Solo_SPK13.indb 22
19.05.2021 12:28:20
19.05.2021 12:28:20
