SOUND VOLUME ADJUSTMENT
Press the VOLUME buttons (located on remote control unit or on the projector) to
adjust the volume. The volume display will be displayed on the screen for a
few seconds.
Pressing volume (+) will increase volume and increase the number on the
screen. Pressing volume
( - )
will
decrease volume and decrease the number on
the screen.
SOUND MUTE FUNCTION
Pressing the MUTE button on the remote control unit will mute audio. Press
the MUTE button again to restore audio to its previous level. The mute display
will be
displayed on the screen for a
few seconds.
ZOOM ADJUSTMENT (Top control and Wireless/Wired remote control unit)
Press the ZOOM (+) or
(-)
button to obtain your desired picture size. For a larger
picture, press (+) and for a smaller picture, press
(-).
ZOOM ADJUSTMENT (Wireless remote control unit)
Press the ZOOM button and press POINT UP/DOWN button(s) to obtain your desired picture size. The Zoom display
will be displayed on the screen for a few seconds. For a larger picture, press (UP) and for a smaller picture, press
(DOWN).
FOCUS ADJUSTMENT (Top control and Wireless/Wired remote control unit)
Press the FOCUS (+) or
(—)
button for a sharper, crisper picture.
FOCUS ADJUSTMENT (Wireless remote control unit)
Press the FOCUS button and press POINT UP/DOWN button(s) to obtain a sharper,
crisper picture. The Focus display will be displayed on the screen for a few seconds.
LENS SHIFT FUNCTION (Top control and Wireless/’Wired remote control unit)
Press the LENS SHIFT (+) or
(-)
button to obtain your desired screen position.
LENS SHIFT FUNCTION (Wireless remote control unit)
Press the LENS
SHIFT
button
and press POINT UP/DOWN button(s) to obtain your
desired
screen position. The Lens shift display will be displayed on the screen for a
few
seconds.
NORMAL PICTURE FUNCTION
The normal picture level
is factory preset on
the projector and can be restored
anytime by
pressing the NORMAL button (located on remote control unit or on
the projector). The
“Normal” display will be displayed on the
screen for a few seconds.
NO SHOW FUNCTION
Press the NO SHOW button on the remote control unit. The screen will
change into
black
image and the “NO SHOW’ is displayed on the screen for a few seconds.
This function is cancelled when the NO SHOW button is pressed again or any other
function button is pressed.
P-TIMER FUNCTION
Press the P-TIMER button on the remote control unit. The timer display “00:00” appears on the
screen and the timer starts to count the time (00:00-59:59).
Press again the P-TIMER button to stop the timer. Then press the P-TIMER button to cancel the
P-TIMER function.
FREEZE PICTURE FUNCTION
Press the FREEZE button on the remote control unit, and the picture
will remain on-screen. This function is cancelled
when the FREEZE button is pressed again or any other function button is pressed.
NOTE: Your computer or video equipment is not affected by this function, and
will continue to run.
AUTO IMAGE FUNCTION
Press the AUTO IMAGE button on the remote control unit or on the projector. The item(s) indicated “ON” in the
AUTO
IMAGE FUNCTION are adjusted automatically.
If
all the items
in AUTO IMAGE FUNCTION are “OFF”, AUTO IMAGE SETTING display appears.
If
you wish
to operate
the AUTO IMAGE FUNCTION, perform the steps 3
-
9 of “AUTO IMAGE FUNCTION” section on page 39.
Summary of Contents for LC-XlU
Page 1: ...MULTIMEDIA PROJECTOR MODEL LC XlU OWNER S INSTRUCTION MANUAL ...
Page 17: ...OPERATION OF CONTROLS ...
Page 27: ......