LC-XG300/250_ Basic Serial Command Specifications
Ver.
Rev.A
Page
15
6.27. INPUT 2 RGB Command
Command
C25 [CR]
Detail
Select RGB input in Input 2.
Acceptable [ACK]
[CR]
Response
Unacceptable
？
[CR]
6.28. IMAGE
Command
Command
C27 [CR]
Detail
Switch Image Setting status.
This command operates the same way as “IMAGE” button of the projector.
Acceptable [ACK]
[CR]
Response
Unacceptable
？
[CR]
6.29. ON START Setting Command
Command “C28”
[CR]
Detail
Enable Power ON Start.
This status is stored in EEPROM and retained regardless of Power OFF/ON.
Acceptable [ACK]
[CR]
Response
Unacceptable
？
[CR]
6.30. ON START Cancel Command
Command “C29”
[CR]
Detail
Disable Power ON Start.
This status is stored in EEPROM and retained regardless of Power OFF/ON.
Acceptable [ACK]
[CR]
Response
Unacceptable
？
[CR]
6.31. Power Management Ready Command
Command “C2A”
[CR]
Detail
Set Power Management to Ready mode.
This status is stored in EEPROM and retained regardless of Power ON/OFF.
Acceptable [ACK]
[CR]
Response
Unacceptable
？
[CR]
6.32. Power Management OFF Command
Command “C2B”
[CR]
Detail
Set Power Management OFF.
This status is stored in EEPROM and retained regardless of Power ON/OFF.
Acceptable [ACK]
[CR]
Response
Unacceptable
？
[CR]
