40
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
APPENDIX
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the
projector or the service center. Give the model number and explain the problem in detail. We will advise you of how to
obtain service.
Remote Control Unit
does not work.
●
Check the battery.
●
Make sure nothing is between Infrared Remote Receiver and Remote Control Unit.
●
Make sure of maximum operating distance 16.4’ (5m) between the receiver on the
projector and Remote Control Unit.
●
Make sure the code of Remote Control is set to conform to projector.
(See “SETTING” section on page 35, 36.)
Problem:
Try these Solution
Summary of Contents for LC-SM3
Page 1: ...MULTIMEDIA PROJECTOR OWNER S MANUAL MODEL LC SM3 ...
Page 43: ...43 ...
