Amphion User Guide
Page 18 of 26
Rebooting the S14 after a successful configuration.
If you have configured an S14-N or edited an existing S14-H or S14-C
configuring using the Web-UI, you MUST reboot it to load the new
configuration information. So, you should navigate to the “Reboot
the Amphion” page, which shows this:
Click the “Reboot” button.
You will then see a status screen which tells you that the reboot
process has begun. The process takes up to four minutes and during
this time the browser will not be able to communicate with the
Amphion device. After the reboot is completed, the green system
light will begin its flashing cycle and you can log in again if desired.
Your Amphion is now configured and ready for installation and
operation.
