Make sure that the voltage which is to connect not exceeds the specified values.
Make sure that it isn’t possible to squeeze or damage the power cable with sharp edges.
yourself with regular checks that there are
Unplug the power supply before every cleaning.
Don’t switch the device in short time intervals (e.g. in second cycle) on or off.
Keep away children and laymen off the device.
Health risk!
Don’t look directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especially true for
individuals whose epilepsy was determined by a doctor.
Designated use
This device was developed for professional
approved for a connection up to 230V 50/60 Hz AC voltage and only for indoor use.
Regular breaks during operation increase the lifetime of your device.
Avoid convulsions or any form of forceful
Make sure that the device is not exposed
Take care that no cables are lying around. You would endanger your own safety and also t
a third party.
It is not allowed to operate or store the device in
or fog is expected. Humidity or very high atmospheric humidity could reduce the isolation of the device
and could cause deathly electric shocks. If you use fog devices the device has not be exposed to a
direct smoke jet. There has to be a safety distance of at least 0.5m between this device and the fog
machine. Make sure that the saturation of the fog has to enable a visibilit
Make sure that the beam is not pointed at combustible materials on a distance of at least
the other parts of the device and between combustible materials you also need a distance of at least
0.5m.
The ambient temperature has to be between 0°C and +40°C. Avoid direct sunlight and close proximity
to heaters. You have also to attend it during the transport in closed motor vehicles.
5 / 19
C O B A L T P L U S
Make sure that the voltage which is to connect not exceeds the specified values.
Make sure that it isn’t possible to squeeze or damage the power cable with sharp edges.
ourself with regular checks that there are no damages to the power cable or the device.
Unplug the power supply before every cleaning.
Don’t switch the device in short time intervals (e.g. in second cycle) on or off.
Keep away children and laymen off the device.
directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especially true for
individuals whose epilepsy was determined by a doctor.
This device was developed for professional use on stages, in discos, theatres etc.
approved for a connection up to 230V 50/60 Hz AC voltage and only for indoor use.
Regular breaks during operation increase the lifetime of your device.
Avoid convulsions or any form of forceful impact during the installation or the start
Make sure that the device is not exposed excessive heat, humidity or dust at the place of installation.
Take care that no cables are lying around. You would endanger your own safety and also t
It is not allowed to operate or store the device in an environment in which spray water, rain, humidity
or fog is expected. Humidity or very high atmospheric humidity could reduce the isolation of the device
thly electric shocks. If you use fog devices the device has not be exposed to a
direct smoke jet. There has to be a safety distance of at least 0.5m between this device and the fog
machine. Make sure that the saturation of the fog has to enable a visibility of at least 10m
Make sure that the beam is not pointed at combustible materials on a distance of at least
the other parts of the device and between combustible materials you also need a distance of at least
has to be between 0°C and +40°C. Avoid direct sunlight and close proximity
You have also to attend it during the transport in closed motor vehicles.
P L U S B E A M 5 R
Make sure that it isn’t possible to squeeze or damage the power cable with sharp edges. Assure
no damages to the power cable or the device.
directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especially true for
cos, theatres etc. The device is only
approved for a connection up to 230V 50/60 Hz AC voltage and only for indoor use.
impact during the installation or the start-up of the device.
excessive heat, humidity or dust at the place of installation.
Take care that no cables are lying around. You would endanger your own safety and also the safety of
an environment in which spray water, rain, humidity
or fog is expected. Humidity or very high atmospheric humidity could reduce the isolation of the device
thly electric shocks. If you use fog devices the device has not be exposed to a
direct smoke jet. There has to be a safety distance of at least 0.5m between this device and the fog
y of at least 10m.
Make sure that the beam is not pointed at combustible materials on a distance of at least 15m. Around
the other parts of the device and between combustible materials you also need a distance of at least
has to be between 0°C and +40°C. Avoid direct sunlight and close proximity
You have also to attend it during the transport in closed motor vehicles.
