You have to attend that with an ambient temperature von 40°C it is not allowed that the relat
humidity exceeds 50%.
Operate the device not during thunderstorms. Surge voltages could destroy the device. Unplug the
power supply during thunderstorms.
During the installation the use of
Surrounding objects or surfaces should not be in contact with the device.
Make sure that during the installation and removal of the device the area below the place of
installation is basically cordoned off. This also applies to implementation of service.
The device has basically been protected by a suitable safety.
Make familiar yourself with the functions of
should not handle with the device
Do not use chemicals or volatile liquids for cleaning. Use a clean dry cloth to wipe off the dust, or a
wet soft cloth for stubborn dirt.
For transport use the original packing or designated accessory to avoid damages during the transport.
For reasons of safety unauthorized changes are forbidden.
An usage of the device which differs from usages which are described in this manual can cause
damages of the device. In that case the warranty expires. Additional you should notice that every
differed usage is related with dangers and can cause e.g. an
crash.
Overhead installation
Danger of life
You have to observe the regulations of BGV C1 (formerly VBG 70)
EN60598-2-7!
The suspension devices have to be build and measured so they can withstand for an hour the tenfold
of the payload without suffering a permanent detrimental deformation.
6 / 19
C O B A L T P L U S
You have to attend that with an ambient temperature von 40°C it is not allowed that the relat
Operate the device not during thunderstorms. Surge voltages could destroy the device. Unplug the
power supply during thunderstorms.
the mounting bracket is obligatory.
or surfaces should not be in contact with the device.
Make sure that during the installation and removal of the device the area below the place of
installation is basically cordoned off. This also applies to implementation of service.
protected by a suitable safety.
Make familiar yourself with the functions of the device before start-up. People without the experience
should not handle with the device. The most cause of functional disorder is inappropriate handling.
not use chemicals or volatile liquids for cleaning. Use a clean dry cloth to wipe off the dust, or a
For transport use the original packing or designated accessory to avoid damages during the transport.
fety unauthorized changes are forbidden.
usage of the device which differs from usages which are described in this manual can cause
damages of the device. In that case the warranty expires. Additional you should notice that every
ith dangers and can cause e.g. an electrical short, fire, electric shock or
Danger of life!
You have to observe the regulations of BGV C1 (formerly VBG 70)
7! Installations are to carry out by skilled personnel only.
The suspension devices have to be build and measured so they can withstand for an hour the tenfold
of the payload without suffering a permanent detrimental deformation.
P L U S B E A M 5 R
You have to attend that with an ambient temperature von 40°C it is not allowed that the relative
Operate the device not during thunderstorms. Surge voltages could destroy the device. Unplug the
Make sure that during the installation and removal of the device the area below the place of
installation is basically cordoned off. This also applies to implementation of service.
People without the experience
The most cause of functional disorder is inappropriate handling.
not use chemicals or volatile liquids for cleaning. Use a clean dry cloth to wipe off the dust, or a
For transport use the original packing or designated accessory to avoid damages during the transport.
usage of the device which differs from usages which are described in this manual can cause
damages of the device. In that case the warranty expires. Additional you should notice that every
electrical short, fire, electric shock or
You have to observe the regulations of BGV C1 (formerly VBG 70) and
personnel only.
The suspension devices have to be build and measured so they can withstand for an hour the tenfold
