12 / 19
C O B A L T P L U S B E A M 5 R
4.4. Lamp control
4.4.1. Switch Lamp
Here you can turn the lamp on or off. Please use the UP/DOWN buttons to choose between ON and
OFF.
4.4.2. Power on light
Here you can choose if the lamp should start suddenly when you turn on the device. Please use the
UP/DOWN buttons to choose between ON and OFF.
4.4.3. Light by DMX
When this mode is activated you can turn the lamp on or off via DMX. In good time prior to turn off the
device increases the lifetime of the lamp. Please use the UP/DOWN buttons to choose between ON
and OFF.
4.4.4. Lamp on delay
Use this function, to turn on the lamp after a predetermined time after sending the actuation signal.
Use 5M, this means 5s.
4.5. Personality
4.5.1. Status Setting
In this menu you can change the basic setting.
Address via DMX:
If you activate this function you can send the DMX address via DMX (RDM) with a special controller.
No DMX Status
Here you can set what should happen if the device lost the DMX signal. You can choose between
three possibilities: Automatic, Close and Hold. Hold is the standard setting.
Pan Reverse
Here you can invert the pan function.
Mic Sensitivity
Here you can set the sensitivity of the microphone.
DMX Mode
Here you can choose between DMX mode 1 and DMX mode 2.
Reset default:
Here you can reset the device.
