for light bulb
replacement
REQUIRED FOR SKU # 9075-RGB-R
1) Assemble the step according to enclosed instructions. Keep
step dry during installation. Make sure transformer stays dry at
all times.
2) Remove the Innovaplas round cap from the step by
compressing the 2 clips at the back.
3) Insert the lighting fixture from the outside of the step.
4) Pass mounting ring through front of hole and fasten using the 2 screws provided.
5) Insert light fixture by aligning the ring and turning 1/4 turn towards left.
6) Apply locking screw. Plug it in.
IMPORTANT:
Use supplied tie-wraps to attach electric cord to a post as shown.
Make sure transformer is located outside the pool.
Conforms to CSA C22.2 no.89
LIGHT FIXTURE # 9075-RGB-R
REV. 15/06/10
3
4
2
6
5
A
THIS GUIDE CONTAINS IMPORTANT SAFETY INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
WARNING
Before installation, carefully
read the warnings and
installation instructions.
Risk of electrical shock.
Failure to follow the safety
instructions and warnings
TABLE OF CONTENTS
A) Light installation on the step.
B) Securing and instaling the
electrical cord and IR
receiver.
C) Before plugging in the
product.
D) Bulb replacement.
E) Winter storage.
LIGHT INSTALLATION ON THE STEP
TOOLS REQUIRED (Not Included)
COMPATIBLE WITH ANY INNOVAPLAS STEP
CONTAINING THE INNOVAPLAS CREST ROUNDEL
LIMITED WARRANTY
90 days on the water tight seal and
manufacturer defects. Replacement only.
MANUFACTURER
WARRANTY
x 3
Transformer
Receiver
Receiver
base
Remote
Light
